The Active Network
ActiveWin: Reviews Active Network | New Reviews | Old Reviews | Interviews |Mailing List | Forums


Product: D810E2CA3 Motherboard & Celeron 900MHz
Company: Intel
Estimated Street Price: $81 for the CPU & $80 for the Mobo
Review By: Julien Jay

Intel Celeron 900MHz

Table Of Contents
1: Introduction
2: Graphics & Audio Features
3: D810E2CA3 Motherboard
4: Intel Celeron 900MHz
5: Benchmarks
4: Conclusion

Over the past three years Intel has made Celeron processors evolve into a mature alternative for affordable but powerful PCs, by adding a welcome 128 KB second level cache memory and more recently a long desired 100MHz frontside bus to boost performance as well as some other neat enhancements. The Intel Celeron 900MHz is the latest incarnation of the Intel Celeron family. This new model doesn’t bring any architecture enhancements: the only plus over the previous 850MHz model is the increased frequency. This new Celeron 2 from Intel is in fact a light version of Coppermine series of CPUs that uses the P6 micro architecture: The Celeron 900MHz now shares the same SSE instructions set as the Pentium III, uses a 100MHz FSB, is equipped with 128 KB of second level cache memory, is now engraved using 0,18µ technology and comes in a FC-PGA Socket 370 Form Factor. This new FC-PGA format is supposed to be more adapted to high frequencies today processors offer and is cheaper to produce. Pentium III and Celeron CPUs now look exactly the same, only the markings differ. During our tests the Celeron 900MHz didn’t heat a lot: it only reaches the maximum temperature of 87.8 F (31.0° Celsius) after intensive use, demonstrating good resistance when users overclock it.

Some Celeron Processors

   Like the Pentium III processor, the Celeron 2 comes with Dynamic Execution Technology to enhance further performance with three distinct features. The Multiple Branch Prediction predicts program execution through several branches; accelerating the flow of work to the processor while the dataflow Analysis creates an optimized, reordered schedule of instructions by analyzing data dependencies between instructions. Finally the speculative execution unit carries out instructions speculatively and based on this optimized schedule, ensures that the processor’s superscalar execution units remain busy, boosting overall performance.

Intel Celeron 900MHz Processor (click to enlarge)

   Thanks to the 0,18µ technology the Celeron heats less than before and so its voltage has been changed from 2 to 1.6 volts. The Celeron 900MHz fully supports MMX extensions: Intel MMX technology includes instructions and data types that allow applications to achieve a new level of performance. Intel’s MMX technology is designed as a set of basic, general-purpose integer instructions that are easily applied to the needs of a wide diversity of multimedia and communications applications. The highlights of the technology are: Single Instruction, Multiple Data (SIMD) technique, 57 new instructions, Eight 64-bit wide MMX technology registers, and four new data types. Adding SSE instructions to the Celeron 2 is a good thing since those instructions will complete the MMX ones to boost some operations with games or applications that use the Direct X APIs from Microsoft. SSE instructions are especially dedicated to enhanced overall 3D performance.

   The Internet Streaming SIMD Extensions consist of 70 new instructions (with 52 Floating point ones) and includes single instruction, multiple data for floating-point, additional SIMD-integer and Cacheability control instructions. In comparison to casual SISD (single instruction, single date) the SIMD instructions of the MMX & SSE set of instructions can work on several data types at the same time (up to 4 floating numbers in 32bits for SSE). Some of the benefits to desktop and Internet applications of Internet Streaming SIMD Extensions include: higher resolution and quality images can be viewed and manipulated than previously possible, high quality audio, MPEG2 video, and simultaneous MPEG2 encoding and decoding, reduced CPU utilization for speech recognition, as well as higher accuracy and faster response times.

   One thing is very important in the architecture of every processor: the cache memory. For memory, the cache memory stores the most used instructions or data to speed up operations and reduces computing delays. The Celeron 900 MHz comes with 16 KB of data and another 16 KB instructions L1 cache.  The L1 cache memory ensures that the CPU is always fed with data so it really has a significant impact on performance. Also included with the Celeron 900 MHz is an on-die 128 KB 4 way associative L2 cache (against 256 KB 8 way associative for Pentium III) clocked at the CPU full speed that is to say 900 MHz and connected to it through a 256-bit bus. First Celeron used a 64-bit only bus so this new 256-bit bus can convey more data in one single clock cycle resulting in better performances, once again.


« D810E2CA3 Motherboard Benchmarks »


  *   *